How mount tv?

How mount TV?

Edit on 21st, Aug, 2020

When your TV is broken and in disrepair, you buy an LCD TV and have a TV stand ready to install. At the beginning, I felt that the INSTALLATION of TV stand was more redundant, which could be placed directly on the cabinet or the wall, but the individual did not have the right to speak. After tv wall bracket is installed, the vision that sees TV and effect are really different.

First: Matters needing attention for TV wall bracket installation

1. If the gypsum board wall needs to be positioned in advance, then dig holes with a box cutter, and then drill holes in the wall with a percussion drill. When screws are applied, put a piece of wood on the hanging hole, and then increase the stressed area.

2. The height of LCD TV and human eye level to achieve the same TV center, equipment spacing should be 3-5 times the diagonal of the LCD TV screen. For example, 37 inches LCD TV, if the audiovisual interval is less than 1.4 meters, it is not suitable for wall-mounted LCD TV, to avoid watching TV for a long time to constitute cervical pain, fatigue eyes and other problems, harm to the human body more.

3. The weight of LIQUID crystal TV is generally above 35 jin, to avoid the natural fall after the installation of liquid crystal TV, must look for high strength solid brick, concrete equipment, the provision of its support.

Second: Installation process of TV wall mount arm

1. TV wall mount arm installation - ready
(1) First check the material of the TV stand, then look at the installation position, prepare the screwdriver, and read the installation instructions.
(2) Collect the required data as accurately as possible to avoid installation errors, and then mark the corresponding position.

(1) Connect the 2 vertical transition rods in the center to the 4 screw holes on the back of the TV set, put the hooks on the top, and pay attention to the stability of the connection.

(2) Height of the device

The height of the installation is usually the same as the visual field when people stand, or the height of the device is chosen according to personal preference. First, one person carries the rack and presses it on the wall. Then, another person stands far away and tests it with his eyes, mainly to see whether it is tilted.

3) According to the requirements of installation, two 10mm holes should be made on the rack row and the lower row respectively. Please pay attention to the depth and spacing of the holes. The measurement should be accurate and the wooden board wall should be fixed by screw tapping screw directly.

(4) When the back of the TV is fixed on the transition bar, 2 people should carry the TV and hang it on the frame on the wall. Then look at the bottom of the TV and lock the 2 long screws at the bottom of the transition bar. When the installation is confirmed, it is OK.